SPECIFICATION FOR TOILETS AND SANITARY WARE

WC Cubicles

Constructed from high quality 15 mm thick melamine faced chipboard, grey liner pattern, graffiti-resistant. The cubicles are 1950 mm high including 150 mm ground clearance. All assembly fittings, indicator bolts and coat hooks are of anodized aluminium.

Skirting, Wet Areas

Skirting to all wet areas to be coved profiled black PVC skirting 100 mm high set into the vinyl and continuously seam welded to provide waterproof joints.

Plumbing Specification

General

The plumbing installations comply with all Building and Water Authority Regulations.

Wash Hand Basin (460 x 305)

Twyfords 'Classic' or equivalent white vitreous china, (size 460 x 305 mm) complete with overflow and a pair of stainless steel supporting legs to each basin. The basins to have plugs and chrome plated non-concessive taps.

Toilets

Twyfords 'Classic' or equivalent white vitreous china washdown WC pan with horizontal outlet to BS 5503, complete with a 9 litre white vitreous china cistern and cover to BS 1125 : 1987 with all fittings suitable for mains pressure. The cistern incorporates a cover clip, along with a chrome plated lever handle and 19 mm overflow warning pipe which is terminate through the external walling. A black plastic seat and cover is provided for each WC.

Urinals

Twyfords 'Clifton' or equivalent, white vitreous china bowl urinal complete with chrome plated strainer. Suitably sized white vitreous chain cistern to BS 1876 : including syphon and drip tap is provided. Stainless steel flush pipe with spreader and clip is fitted between the cistern and the bowl. Each set of urinals is fitted with a flushing control device such as a cisternmiser or equivalent.

Sink Unit

Consisting of a sink base unit, faced in white melamine with lipped edges to match and fitted with heavy duty plastic handles. 90 mm white melamine faced plinths are included. Units are 1000 x 600 as Solas range and are complete with single drainer, stainless steel top, (LH or RH), 2 pillar taps and associated waste assembly.

Waste Pipes

All waste pipes from the sanitary fittings is UPVC to BS 4514 and of an appropriate size to suit the fittings. The urinals and wash basins have75 mm deep traps and the showers have a 50 mm deep trap. The waste pipe work is located above floor level and terminate into an air admittance valve/drain connection. Head of drain runs vented to atmosphere.

Tests

On completion of the plumbing installation, the necessary tests are carried out to ensure that all joints are complete and leak free.

Option - Heating

Gas fired wet system. Radiators sized to suit each room area. Heating coils provided within changing rooms. To include TRVs to all radiators. 7 day time clock & frost protection.

Option - Hot water

Gas fired boilers will heat & store water in domestic cylinders. Thermostatic mixer valves to all showers.

Gas installation by Corgi registered contractor. Gas certificate provided on completion.

Due to ongoing development, we reserve the right to alter specification without prior notice